Vodafone Galaxy Tab P7100 to Honeycomb 3.0.1 BUKE2 Firmware Update

You can now be glad that if you are an owner of Vodafone Galaxy Tab P7100 that is 10.1 inch as you can start for an all new update of Honeycomb 3.0.1. It is strictly noted that this update must be administered only on your own Galaxy Tab P7100 model of galaxy.

There are the pre-requisites that must be observed, the instructions must also be taken step by step and followed accurately to have a great Vodafone Galaxy Tab P7100 update through using theHoneycomb 3.0.1.

Vodafone Galaxy Tab P7100 Honeycomb 3.0.1 Update

Follow this Procedure in order to install Honeycomb 3.0.1 in your Vodafone galaxy Tab P7100

1.  When you have downloaded the latest version of Honeycomb 3.0.1 flash kit in your computer you will have to make it sure that you have copied the same to your desktop and not to other location. Then you need to extract the same to the desktop in only one folder.
2. When you have already unzipped the zip file there will be only 4 files and these are the Odin Boot loader file, PDA file and the modem file. When you have finished the unzipping the files there will see the completed files. If in case a file is missing then you must have to download the same again.
3. Then you will click on the Odin tool so that you can open it and at this time you must put your Vodafone Galaxy Tab P 7100. This download mode may be entered by pressing the volume down the button to start then followed by the Volume up key and last the power the device.
4.  After you have gotten into the download mode, you need to have to connect the Vodafone Galaxy Tab P7100 in the computer with the use of USB cable while Odin will open at the desktop and as soon as you connect the phone. Then you are going to see that first ID: Com box is going to turn yellow and the message box you will show ADDED and after that you need to add the files accordingly.
5. When you have opened the Odin in the option list you must have to check all the options through the option field which are “Re Partition”, “Auto Reboot” and the “F:Reset Time”. Then when you update all the option fields, you need to choose next the options like Boot loader, PDA and the Phone too.
6. It is important that you note and double checked the entries of the selection of files as above mentioned and then proceed and you need to click on the “Start” option to begin the firmware updating process. When clicking on the start, you will notice that the Honeycomb 3.0.1 firmware will be installed in your phone at a time of not more than 5 minutes. And as the update is applied into the phone, the phone begins processing the update at the final stage. Then in the message box you will see a message as “Pass” which is an indication that you have completed the firmware update and was done successfully.

When the Vodafone Galaxy Tab P7100 reboots, then select the options and when the Media scanning is completed then go in the Recovery Mode and then delete the cache memory to remove all unwanted files that are left in the tab.

Strict following of these instructions and procedures on how to install the Honeycomb 3.0.1 on your mobile phone will result to successful and great update of your Galaxy mobile phone. This will result to better usage and application of your wonderful Galaxy Tab